![background image](http://html2.mh-extra.com/html/omega/dp26-rtd/dp26-rtd_user-manual_4044223023.webp)
3.3 MOUNTING THE METER
Figure 3-3 Meter - Exploded View
1.
Cut a hole in your panel, as
shown in Figure 3-3. For
specific dimensions refer to
Figure 3-4.
2.
Insert the meter into the hole.
Be sure the front bezel gasket
is flush to the panel.
3.
Slide on mounting bracket to
secure.
4.
Proceed to Section 3.4 to
connect your sensor input
and main power.
Figure 3-4 Panel Cut-Out
15
"NEW" STYLE
MOUNTING
BRACKET
FRONT BEZEL
CASE
REAR COVER
(REMOVED)
PANEL
CUT-OUT
"OLDER" STYLE
MOUNTING
BRACKET 2 PCS
GASKET
PRODUCT
LABEL
CONNECTOR
LABEL
45,00 + 0,61/-0,00
(1.772 + .024/–.000)
92,00 + 0,81/–0,00
(3.622 + .032/–.000)
PANEL THICKNESS
1,5
R
(.06)
4 PLCS
6,4 (.25) MAX
0,8 (.03) MIN
NOTE: Dimensions in Millimeters (Inches)
Summary of Contents for DP26-RTD
