5
6
DP24-E
Process Meter
12172ML-99 Rev. E
MQS1866/0202
This device is marked with the international caution symbol. It is important to read
the Setup Guide before installing or commissioning this device as it contains
important information relating to safety and EMC.
It is the policy of OMEGA
to comply with all worldwide safety and EMC/EMI regulations that
apply. OMEGA
is constantly pursuing certification of its products to the European New
Approach Directives. OMEGA
will add the
mark to every appropriate device upon
certification.
The information contained in this document is believed to be correct but OMEGA
Engineering, Inc. accepts no liability for any errors it contains, and reserves the right to alter
specifications without notice.
WARNING:
These products are not designed for use in, and should not be used
for, patient connected applications.
TRADEMARK NOTICE:
,
omega.com
®
are trademarks of OMEGA Engineering, Inc.
®
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in
materials and workmanship for a period of
13 months
from date of purchase.
OMEGA Warranty adds an additional one (1) month grace period to the normal
one (1) year product warranty
to cover handling and shipping time. This
ensures that OMEGA’s customers receive maximum coverage on each product.
If the unit should malfunction, it must be returned to the factory for evaluation.
OMEGA’s Customer Service Department will issue an Authorized Return (AR)
number immediately upon phone or written request. Upon examination by
OMEGA, if the unit is found to be defective it will be repaired or replaced at no
charge. OMEGA'S WARRANTY does not apply to defects resulting from any
action of the purchaser, including but not limited to mishandling, improper
interfacing, operation outside of design limits, improper repair, or unauthorized
modification. This WARRANTY is VOID if the unit shows evidence of having
been tampered with or shows evidence of being damaged as a result of
excessive corrosion; or current, heat, moisture or vibration; improper
specification; misapplication; misuse or other operating conditions outside of
OMEGA’s control. Components which wear are not warranted, including but not
limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various
products. However, OMEGA neither assumes responsibility for
any omissions or errors nor assumes liability for any damages
that result from the use if its products in accordance with
information provided by OMEGA, either verbal or written. OMEGA
warrants only that the par ts manufactured by it will be as
specified and fr ee of defects. OMEGA MAKES NO OTHER
W A R R A N T I E S O R R E P R E S E N TAT I O N S O F A N Y K I N D
WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF
T I T L E , A N D A L L I M P L I E D W A R R A N T I E S I N C LU D I N G A N Y
W A R R A N T Y O F M E RC H A N TA B I L I T Y A N D F I T N E S S F O R A
PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION
OF LIABILITY: The remedies of purchaser set forth herein are
exclusive and the total liability of OMEGA with respect to this
or der, w hether based on contr act, war r anty, ne gligence,
indemnification, strict liability or otherwise, shall not exceed the
purchase price of the component upon which liability is based.
In no event shall OMEGA be liable for consequential, incidental
or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall
it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with
any nuclear installation or activity; or (2) in medical applications or used on
humans. Should any Product(s) be used in or with any nuclear installation or
activity, medical application, used on humans, or misused in any way, OMEGA
assumes no responsibility as set forth in our basic WARRANTY / DISCLAIMER
language, and additionally, purchaser will indemnify OMEGA and hold OMEGA
harmless from any liability or damage whatsoever arising out of the use of the
Product(s) in such a manner.
RETURN REQUESTS / INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service
Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER
MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S
CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING
DELAYS). The assigned AR number should then be marked on the outside of the return
package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper
packaging to prevent breakage in transit.
FOR
WARRANTY
RETURNS, please
have the following information available
BEFORE
contacting OMEGA:
1. P.O. number under which the product
was PURCHASED,
2. Model and serial number of the
product under warranty, and
3. Repair instructions and/or specific
problems relative to the product.
FOR
NON-WARRANTY
REPAIRS,
consult OMEGA for current repair
charges. Have the following information
available BEFORE contacting OMEGA:
1. P.O. number to cover the COST of the
repair,
2. Model and serial number of product,
and
3. Repair instructions and/or specific
problems relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an
improvement is possible. This affords our customers the latest in technology and
engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2002 OMEGA ENGINEERING, INC. All rights reserved.
This document may not be copied, photocopied, reproduced, translated, or reduced
to any electronic medium or machine-readable form, in whole or in part, without prior
written consent of OMEGA ENGINEERING, INC.
USA
MADE
IN
PATENT NOTICE:
The “Meter Case Bezel Design” is a trademark of NEWPORT
Electronics, Inc., registered in the U.S. USED UNDER LICENSE. This product is covered
by one or more of the following patents: U.S. Pat. No. Des. 336,895, 5,274,577/ Canada
2052599, 2052600/ Italy 1249456, 1250938/ France Brevet No. 91 12756/ Spain 2039150,
2048066/ UK Patent No. GB2 249 837, GB2 248 954/ Germany DE 41 34398 C2.
OTHER INTERNATIONAL PATENTS PENDING.
Configuration Mode
The following table lists display prompts that appear
when the meter is in the configuration mode.
MENU
/TARE
/MAX
InP
0-10
4-20
20-4
0-5
1-5
dEc.P
FFF.F
FFFF.
FFFF
F.FFF
FF.FF
ScAL
int
rd1*
LivE
XXXX
rd 2*
*XXXX
* Shows only if you press the
/MAX button.
Tare
The following buttons enable tare functions in the run
mode:
T-RST
Clears tare value
/TARE
Tares display value to zero.
Reference Information
Meter Modes
Run Mode - The meter is in the run mode when the
display is actively showing a process.
Configuration Mode - The meter is in the configuration
mode when you press the MENU button to enable
meter configurations.
Jumpers
The following table gives you information about
jumpers. Refer to the illustration below for exact
jumper location. Refer to the Operator's Manual for
additional jumper information.
S1 - S3 Jumpers
S3
S2
S1
Jumper
Description
S1
Installed:
10 V excitation
Removed
: 24 V excitation
S2
Installed:
Front-panel buttons locked
out
Removed:
All buttons operable
S3
Installed
: PEAK shows when
/MAX
button is pushed. PrsT (Peak Reset)
is active when RESET is pushed.
Press
/MAX to show PEAK value.
*
Removed
: VALLEY shows when
/MAX button is pushed. VrST
(Valley Reset) is active when
RESET is pushed. Press
/MAX to
show VALLEY value.
*
*
Shows in run mode only
Servicing North America:
USA:
UU
One Omega Drive, P.O. Box 4047
ISO 9001 Certified
U
Stamford CT 06907-0047
UU
TEL: (203) 359-1660UU
FAX: (203) 359-7700
UU
e-mail: [email protected]
Canada:
UU
976 Bergar
UU
Laval (Quebec) H7L 5A1
UU
TEL: (514) 856-6928UU
FAX: (514) 856-6886
UU
e-mail: [email protected]
For immediate technical or application assistance:
USA and Canada:
U Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA
®
UU
Customer Service: 1-800-622-2378 / 1-800-622-BEST
®
UU
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN
®
$$
TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA
Mexico and
U
TEL: (001)800-TC-OMEGA
®
U
FAX: (001) 203-359-7807
Latin American:$
En Espa
ñ
ol: (001) 203-359-7803U
UU
e-mail: [email protected]
Servicing Europe:
Benelux:
UU
Postbus 8034, 1180 LA Amstelveen, The Netherlands
UU
TEL: +31 20 3472121UU
FAX: +31 20 6434643
UU
Toll Free in Benelux: 0800 0993344U
UU
e-mail: [email protected]
Czech Republic:
U
Rudé armády 1868, 733 01 Karviná 8
UU
TEL: +420 69 6311899U FAX: +420 69 6311114
UU
e-mail: [email protected]
France:
UU
9, rue Denis Papin, 78190 Trappes
UU
TEL: +33 130 621 400U FAX: +33 130 699 120
UU
Toll Free in France: 0800406342
UU
e-mail: [email protected]
Germany/Austria:
U Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
UU
TEL: +49 7056 9398-0U FAX: +49 7056 9398-29
UU
Toll Free in Germany: 0800 639 7678
UU
e-mail: [email protected]
United Kingdom:
U One Omega Drive
ISO 9002 Certified
U
River Bend Technology Centre
UU
Northbank, Irlam Manchester M44 5BD United Kingdom
UU
TEL: +44 161 777 6611U FAX: +44 161 777 6622
UU
Toll Free in England: 0800 488 488
UU
e-mail: [email protected]
OMEGAnet
®
On-Line Service
www.omega.com
Internet e-mail
®
®
RoHS 2 Compliant
