Omega DP119 User Manual Download Page 41 | Manualshive

Page: 41 / 41

background image

Servicing North America:

USA:

One Omega Drive, Box 4047

ISO 9001 Certified

Stamford, CT 06907-0047
Tel: (203) 359-1660

FAX: (203) 359-7700

e-mail: [email protected]

Canada:

976 Bergar
Laval (Quebec) H7L 5A1
Tel: (514) 856-6928

FAX: (514) 856-6886

e-mail: [email protected]

For immediate technical or application assistance:

USA and Canada:

Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA

SM

Customer Service: 1-800-622-2378 / 1-800-622-BEST

SM

Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN

SM

TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA

Mexico and
Latin America:

Tel: (95) 800-TC-OMEGA

SM

FAX: (95) 203-359-7807

En Espan˜ol: (203) 359-7803

e-mail: [email protected]

Servicing Europe:

Benelux:

Postbus 8034, 1180 LA Amstelveen, The Netherlands
Tel: (31) 20 6418405

FAX: (31) 20 6434643

Toll Free in Benelux: 0800 0993344
e-mail: [email protected]

Czech Republic:

ul.Rude armady 1868, 733 01 Karvina - Hranice
Tel: 420 (69) 6311899

FAX: 420 (69) 6311114

e-mail: [email protected]

France:

9, rue Denis Papin, 78190 Trappes
Tel: (33) 130-621-400

FAX: (33) 130-699-120

Toll Free in France: 0800-4-06342
e-mail: [email protected]

Germany/Austria:

Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
Tel: 49 (07056) 3017

FAX: 49 (07056) 8540

Toll Free in Germany: 0130 11 21 66
e-mail: [email protected]

United Kingdom:

One Omega Drive,

ISO 9002 Certified

River Bend Technology Centre
Northbank, Irlam,
Manchester, M44 5EX, England
Tel: 44 (161) 777-6611

FAX: 44 (161) 777-6622

Toll Free in England: 0800-488-488

e-mail: [email protected]

OMEGAnet

SM

On-Line Service

Internet e-mail

http://www.omega.com [email protected]

It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply.
OMEGA is constantly pursuing certification of its products to the European New Approach Directives.
OMEGA will add the CE mark to every appropriate device upon certification.

The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no liability for
any errors it contains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, patient connected applications.

This device is marked with the international hazard symbol. It is important to read the Setup Guide before
installing or commissioning this device as it contains important information relating to safety and EMC.

«
...
39
40
41

Summary of Contents for DP119










































Reviews:

No comments

Related manuals for DP119

Brand: iDevices Pages: 12

Brand: OERTLI Pages: 36

Brand: Oregon Scientific Pages: 9

REFERENCE THERMAPEN

Brand: ETI Pages: 2

Brand: Danfoss Pages: 2

Brand: Sensi Pages: 6

Brand: HTA Instrumentation Pages: 8

Raynger MX Series

Brand: RayTek Pages: 2

Brand: EPH Controls Pages: 2

Brand: Sinope Pages: 2

GREISINGER GTH 1150

Brand: GHM Pages: 10

Brand: Drayton Pages: 28

Brand: Safety 1st Pages: 2

Brand: Elesta Pages: 2

Brand: VDH Pages: 4

Brand: VDH Pages: 10

Brand: Baxi Pages: 16

Brand: INNOLIVING Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands