![background image](http://html1.mh-extra.com/html/omega/dfg207/dfg207_user-manual_4017036005.webp)
5 |
M 5 7 9 3
•
Do not use the gauge in the following environment:
-
Wet environment
-
Dusty environment
-
Next to an environment with chemicals or oils
-
Next to a vibration source
•
After use, please put the force gauge into the portable box to protect the testing shaft from damage.
•
Do not disassemble or repair the machine by yourself, which may cause permanent fault of the gauge.
2
Power
2.1
Power On & Off
Power On
Install the batteries correctly or plug in the DC power supply. Then press the Power/Exit Key (POWER/EXIT) to power on
the gauge.
Power Off
Manual Power Off
In the state of power-
on, press and hold the Power/Exit Key (POWER/EXIT) for about 2 seconds, the indicator ‘
OFF
’
appears. Then release the key and the gauge will be powered off.
Auto Power Off
The Auto power off function can be activated by the user. When it is activated, the gauge will be powered off
automatically after 10 minutes with no key operation. For details, please refer to Section
5.5 Setting Auto Power Off
.
2.2
Battery Replacement
When it is necessary to replace the battery, the battery symbol will appear on the device display. Follow the
instructions below to replace the battery:
Step 1:
Slide the Battery Cover away from the gauge and remove the batteries.
Step 2:
Install new batteries correctly into the case.
Step 3:
If the gauge is not to be used for any extended period, remove the batteries.
*Power can be supplied by either alkaline batteries or 6V DC power supply.