background image

The system may be "Armed" by any of 3 methods:

1) 

Remote Control Arming:  Press & Release the “Lock” button

Page 3

Arming the Alarm

2) SILENT Remote Control Arming:  

Press & Release the Middle “••”

   button Twice within 3 seconds

Upon Arming: • The siren will chirp one time. (3 times if there is open zone)

• The parking lights will flash once.
• The doors will lock. (If an optional interface is connected)
• The starter interrupt will engage.
• The LED Status Indicator will begin to flash slowly.

- If a zone is open, (for example a car door), when arming, the alarm will still arm,
but will bypass the open zone until the zone is secured (siren will chirp 3 times).

3) To Passively Arm:   Turn Ignition “Off”, Then Close all Doors.

Automatic “Last Door Arming” is a programmable feature which allows the alarm
to arm itself and, if desired, lock the doors upon arming.

If on, anytime the ignition is turned off, and then a door is opened and closed:

• The Siren will chirp once to confirm arming countdown has begun.
• The LED Status Indicator will begin to flash rapidly.

Thirty seconds later:

• The siren will chirp & the lights will flash once.
• The LED Status Indicator will begin to flash slowly.
• The starter interrupt will engage.

- The alarm is now fully armed.  The doors will lock at this time, if programmed to
do so, and if the vehicle is equipped.

- The system can not Last Door Arm if a protected zone is open. Should a ve-
hicle door be opened during the arming countdown, the countdown will stop and
start over again when the door is closed.  AUTO REARM (programmable) allows
the Alarm to Rearm itself, if it is Disarmed and a vehicle door is not opened.

   THE SIREN WILL

CHIRP ONCE

 THE PARKING LIGHTS

WILL FLASH ONCE

THE DOORS WILL LOCK

(IF CONNECTED)

 THE PARKING LIGHTS

WILL FLASH ONCE

THE DOORS WILL LOCK

(IF CONNECTED)

2 X

Summary of Contents for Crime Guard 350i5



























Reviews: