background image

Page 11

4. Double Pulse Unlock: ( 2 pulses = 1 siren chirp / • 1 pulse = 2 chirps)

- Sets alarm to give 2 unlock pulses upon Disarm for cars that require it.

5. Immobilizer Mode: ( On = 1 siren chirp / •Off = 2 chirps)

- If this mode is programmed “On”, the starter interrupt will remain engaged

after the alarm is Disarmed, until the vehicle’s ignition is turned “On” and you
Press & Release the Valet button.

- Anti-Carjack:  Upon disarming the “Immobilizer mode”, ignition activated anti-
carjacking
 will be automatically cancelled, (if  programmed “On”).

- Remote Control Programming Mode: Immobilizer mode must be disarmed
before entering remote control programming mode.

6. Siren & Horn  or  Horn: ( •Siren & Horn = 1 siren chirp / Horn = 2 chirps)

- This feature configures the alarm’s Brown/White Horn-Honk output wire.

This wire can be configured to honk the horn in addition to the Brown wire
operating the siren, or take over all of  the Siren’s functions SO THAT NO
SIREN IS NECESSARY.

- If Siren & Horn are selected:  The horn will honk in addition to siren sounding
only when the door, pin-switch, or ignition zones are violated. (The horn will not
honk if alarm is triggered by the sensor zone, or during confirmation “chirps”)

- If Only Horn is selected: The car horn will replace the siren and perform all
of its functions. NOTE: Brown Siren wire will still be fully active & operational.

7. Shock Sensor False-Alarm Bypass: (On = 1 siren chirp / •Off = 2 chirps)

- This feature will temporarily turn “Off”  the shock sensor & pre-warn zone if:

a. The pre-warn is triggered 10 times while the alarm is Armed.
b. The instant trigger zone is triggered 5 times while the alarm is Armed.

- The by-passed zones will be reinstated the next time the alarm is Armed.

8. Dome-Light Delay Bypass: (On = 1 siren chirp / •Off = 2 chirps)

- This feature will turn “Off” the 3-chirp open zone warning when Arming the
alarm with the remote control. This is for use in vehicles that keep the dome-light
illuminated after the doors have been closed.

9. Ignition Activated Anti-Carjacking: (On = 1 siren chirp / •Off = 2 chirps)

- This feature turns the alarm’s Ignition Anti-Carjacking feature “On” or “Off”.

10. Remote & Door Activated Anti-Carjacking: (On = 1 chirp / •Off = 2 chirps)

-This feature turns both the alarm’s Remote Control  and  Open Door activated

Anti-Carjacking features “On” or “Off”.

Summary of Contents for Crime Guard 350i5



























Reviews: