/3
OMEGA SA
WORLD SERVICE ORGANIZATION
GT-19-C-063-E - A - 3603
General information for calibre 3603
Exchange
with serial no
Version A
Balance bridge,
(réf. 7223603A1005818)
For exchanges always sent to Omega.
Engravings at Omega within 4 weeks.
Balance bridge
The bridges with serial numbers are not available
(see CS-Info Calibre No 33). For exchange, see table :
Key points
The three intermediate driving wheels for ratchet wheel (32.083)
must be correctly lubricated with Moebius SYNT-HP-1300 Sans
Colorant. Insuf
fi
cient lubrication could lead to the formation of burrs
or chips and hinder the correct winding of the barrel. Cleaning
would not be suf
fi
cient to remove all this.
(see page 4 and 5).
Due to the movement construction, there are various screw lengths.
To avoid problems at assembly, group identical screws together for
cleaning.
Co-axial Escapement lubrication
See Working Instruction No 40.
Date correction
Date correction should not be performed between 10 pm and 2 am.
Tightening and untightening torques according to screw
thread size
Screw Ø
Tightening torque target cNm
Untightening torque mini cNm
Ø
threads
≤
S 0.50 mm
1.0
0.7
Ø
threads S 0.6 mm
1.4
0.8
Ø
threads S 0.7 mm
1.8
0.9
Ø
threads S 0.8 mm
2.2
1.1
Ø
threads S 0.9 mm
2.6
1.3
Ø
threads S 1.0 mm
3.0
1.6
Ø
threads S 1.2 mm
3.5
2.0
Ø
threads S 1.4 and >
4.0
2.5
Mandatory tools :
To
fi
t the hands, the movement must be placed in a suitable,
well-adjusted movement holder.
Hand
fi
tting
Reference
Movement holder for hand fitting
507 0001
Hand fitting tool kit
507 0011
Movement
Reference
Mainspring winder
502 150 0009
Timing key
502 200 0501
Movement holder
506 0001
Tool for checking the escapement
functions
506
0004
Lubricants
Reference
Moebius SYNT-A-LUBE 9010 (2ml)
504 200 0001
Moebius SYNT HP-1300 SC
504 5013
Moebius 9504
504 5014
Moebius SYNT HP-500
504 5012
Kluber P125
504 100 0071
small quantity
*