background image

/11

OMEGA SA  

WORLD SERVICE ORGANIZATION  

GT-19-C-069-E - A - 1666

Speci

fi

 c Information for calibre 1666

Fig. 2.2

2.2 HANDS

To Synchronize the Hands with the Digital Time.

This is done only after the correct digital

time is set (

TIME

).

- Press P4 for more than 3 seconds to clear the screen.

-  Pull out the crown to position 2. 

Go On ?

 and the 

digital time are displayed.

- Press P1 : digital time stops and 

H

and

S

 is displayed.

-  Press P2 to make the seconds hand move forward, to 

synchronize it with the digital seconds.

- Press P1, 

H

and

M

 is displayed.

-  Press P2 to make the minute hand move forward or P3 

to make it move backward, to synchronize it with the 

digital minutes.

- Press P1, 

H

and

H

 is displayed.

-  Press P2 to make the hour hand move forward or P3 

to make it move backward, to synchronize it with the 

digital hour.

-  Push the crown into position 1. The hands catch up to 

the correct time. Press the crown again to return to the 

previous function.

Attention

The minute hand jumps by ½ minute. If the seconds are 

situated between 30 and 59 seconds, the minute hand 

should be positioned between two minute-scale marks.

Summary of Contents for CALIBRE 1666


















Reviews: