background image

REMOVE PACKAGING

 

Please read instructions before using 
the heater.

(1)  Take heater out of the box and remove the 

polyfoam and polybag.

(2) Inside are:

–   1 polybag containing product and user 

manual

–   2 feet supports in individual polybags 

inserted in polyfoam

–  4 castors in individual polybags inserted in 

polyfoam

(3)  Save the packaging to store the heater 

when not in use.

IMPORTANT SAFEGUARDS

PLEASE READ INSTRUCTIONS BEFORE 
USING THE HEATER.

(1)  To avoid burns, do not touch the hot 

surfaces of the heater when it is in use. 
Use handle when moving this heater. keep 
combustible materials, such as drapery and 
other furnishings at least 900mm from the 
front of the heater and away from the side 
and the rear.

(2)  Do not allow children or infirm persons to 

use this heater without proper supervision.

(3) Do not use outdoors.

(4)  This heater can be used in bathrooms, 

laundry areas or similar indoor locations. 
Never locate the heater where it may be 
reached from a bathtub, basin or shower.

(5)  This heater will become hot during use. 

DO NOT use the heater in areas where 
petroleum, paint and cleaning solvents or 
any other flammable liquids are used or 
stored.

(6)  Do not insert foreign objects into any 

ventilation or exhaust opening as this may 

cause and electric shock, fire or damage to 
the heater.

(7) Always unplug the heater when not in use.

(8)  The use of an extension cord is not 

recommended, however if its use is 
unavoidable then the conductor wire inside 
the cord must be at least 1mm in diameter 
and rate not less than 13 amp.

(9)  Do not run the cord under carpet and do not 

cover it with throw rugs, runners or the like. 
Place the cord away from a traffic area and 
where it will not be tripped over.

(10)  Never use a damaged cord or plug. If 

damaged they must be returned to an 
Authorised Eurolux Service Agent.

(11)  Connect the heater to properly grounded 

outlets only.

(12)  Use the heater only as described in this 

manual. Any other use not recommended 
by the manufacturer may cause fire, 
electric shock or injury to persons.

(13)  Do not use this heater with a programmer, 

timer or any other device that switches the 
heater on automatically.

(14)  The heater must not be located 

immediately below a power outlet.

(15)  Do not cover this heater with any items as 

this may cause over heating.

(16)  Do not use this heater in the immediate 

surroundings of a bath, shower or 
swimming pool.

(17)  Caution: In order to avoid hazards due to 

inadvertent resetting of the thermal cut-out, 
this appliance must not be connected 
to power through an external switching 
device, such as a timer, or connected to a 
circuit that is regularly switched on and off 
by that utility.

(18)  Do not use the heater on the floor without 

mounting the feet.

Summary of Contents for Altise OMC15E1









Reviews: