background image

 

 

OMEGA ALTISE 

 

IMPORTANT SAFETY INSTRUCTIONS 

 

IMPORTANT: 

Read the safety precautions of this booklet carefully before attempting to assemble, install, 
operate or maintain the product described.  Protect yourself and others by observing all safety 
information.  Failure to comply with instructions could result in personal injury and/or property 

damage.  If you are unsure about anything regarding your heater or these instructions, please 
contact Omega Altise on 1300 795 572 in Australia or (09) 415 6000 in New Zealand before 
operating your appliance

1.

 

Read all instructions carefully before using the heater.  

2.

 

Use this heater only as described in this manual. Any other use not recommended by the manufacturer may 
cause fire, electrical shock, or injury to persons. Do not modify this appliance. 

3.

 

Remove the package and ensure that the appliance is undamaged (keep packing box for later storage).  In case 
of doubt do not use the appliance and contact Omega Altise Service.  Do not let children play with any parts of 
the packaging

4.

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 
capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning 
the use of the appliance by a person responsible for their safety.  Children should be supervised to ensure that they 

do not play with the appliance. Extreme caution is necessary when the heater is used by or near children or 
individuals with decreased mental and physical capacity and whenever the heater is left operating unattended. 

5.

 

Before you use the appliance, check if the voltage marked on the rating label corresponds to the mains in your 
home. The appliance must be connected to a grounded power supply. 

6.

 

Avoid using extension cords as the extension cord may overheat and cause a risk of fire. If the use of an extension 
cord cannot be avoided, always use one with a minimum rating of 13Amps. Do not use this appliance with a 

programmer, timer or any other device that switches the appliance on automatically, since a fire risk exists if the 
appliance is covered or positioned incorrectly. 

7.

 

Do not pull the power cord to disconnect with the power source. Always grasp the plug to pull it out. 

8.

 

Do not run power cords under rugs or other combustible materials. Do not place power cords in areas where they 
can be a tripping hazard. Do not operate directly below a power outlet. 

9.

 

Do not insert any objects into the heater as it may cause an electric shock or fire or damage to the heater. Do not 

block or tamper with the heater in any manner while it is in operation. To prevent a possible fire, do not cover the 
appliance in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. 

10.

 

Do not leave the heater unattended. Always unplug the heater when not in use. 

 

WARNING:   

The Function Switch should not be used as the sole means of disconnecting power. Always 
unplug the power cord before servicing or moving the unit.   

 

11.

 

This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use the handle when 
moving the heater (where available) or hold on the sides if not available (make sure the unit is turned off).  Keep 
combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 1m from the heater 
to the sides, front, rear & top.  

12.

 

The heater has hot and arcing or sparking parts inside. It must NOT be used in potentially dangerous locations such 
as flammable, explosive, chemical-laden, corrosive, salty or wet atmospheres. This heater is intended for general 
indoor domestic use ONLY.  

13.

 

This heater is not intended for use in wet or damp locations. Never locate a heater where it may fall into a bathtub 
or other water container.  

14.

 

Do not use the heater outdoors.  

15.

 

This heater includes a tilt switch that turns the heater off if it falls over. Once righted, the heater will completely 
reset and can be used as normal. 

16.

 

Always move or hold the heater from the handle or top & bottom of the appliance, where less heat is generated. 

 
 

WARNING:   To avoid danger of electric shock, unplug from outlet when not in use and before cleaning. If the 

supply cord is damaged, it must be replaced by the manufacturer, its Service Agent or similarly 
qualified persons in order to avoid a hazard.  In order to avoid overheating, do not cover the 
heater.  The heater must NOT be located immediately below a socket outlet.  Do not use the 
heater in the immediate surrounding of a bath, shower or swimming pool. 

 

 2 

Summary of Contents for Altise OCM203O









Reviews: