background image

SFA Companies 
10939  N. Pomona Ave. Kansas City, MO 64153
1-888-332-6419
[email protected]

1 YEAR LIMITED WARRANTY

 

For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, 

without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This 
limited warranty is a consumer's exclusive remedy.

 

Performance of any obligation under this warranty may be obtained by returning the warranted product, freight 

prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.

 

Except  where  such  limitations  and  exclusions  are  speci

fic

ally  prohibited  by  applicable  law,  (1)  THE 

CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE 
PRODUCTS AS DESCRIBED ABOVE. (2) SFA Companies SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL 
OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT 
LIMITATION  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITY AND  FITNESS  FOR A  PARTICULAR 
PURPOSE, SHALL BE LIMITED TO NINETY DAYS, OTHERWISE  THE REPAIR, REPLACEMENT OR REFUND AS 
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, 
AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION, 
ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND 
IS NOT COVERED BY THIS WARRANTY.

 

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not 

apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 
above limitation or exclusion may not apply to you. This warranty gives you 

specific

 legal rights, and you may also 

have other rights, which vary from state to state.

BULB REPLACEMENT INSTRUCTIONS

1. Remove power supply plug from outlet.
2. Remove end bumper and end cap.
3. Remove bulb protector, grasp end of bulb and pull straight out.
4. Slide in new bulb and pull down into socket. 
5. Re-assemble the bulb protector, the end cap and the end bumper.

Reviews: