background image

Page - 5

Active Arming:  The UltiMate can always be armed with the

remote transmitter, provided the ignition switch is off and the
system is not in Valet Mode.  Simply press the transmitter LOCK
button once.  The doors will lock, the parking lights will flash once
(the UltraOne package will also flash the interior light once), the
vehicle's horn will chirp once, the LED Status Light will begin
flashing, and the starter interrupt circuit engages to prevent any
attempt to start the vehicle. Three seconds after the horn chirp the
system becomes fully armed.

Silent Arming  If desired the system may be armed, provided

it is disarmed, without the normal confirmation horn chirp by
pressing and releasing the transmitter's OPTION button twice
within 3 seconds.

Arming Bypass  When arming the system from the remote

transmitter, should any protected circuit (except for the doors) be in
a violated state, the horn will chirp three times and the parking lights
will flash three times.  When Arming Bypass occurs, protection for
the affected circuit only will be temporarily bypassed.  For example,
should the trunk be left open, you can still actively arm the system,
but it will have the three chirp and three flash indication that a
protected circuit is not secure.  Once the system has armed, the
bypassed circuit will automatically be reinstated for protection
should it become non-violated (i.e.- if the trunk is closed).  When a
circuit is in a bypassed state, all other non-violated monitoring
circuits, such as doors or hood, will be protected.  The door
protection circuit also has the Arming Bypass feature, but with the
arming indication of one chirp and one light flash.

Silent Arming and Arming Bypass are operations only associated

with Active Arming the system, and not Passive Arming.

Passive Arming with Last Door Arming:  The UltiMate can be

programmed to arm itself automatically when the vehicle's last door
is closed; this is the “Last Door Arming” feature.  If this feature is
programmed to operate, the moment the last open door is closed
the horn will chirp once and the lights will flash once to confirm that

before turning the ignition off, the doors will not automatically unlock.

#13  Confirmation Chirps: Default ON.  This feature removes the
audible arming and disarming confirmation horn chirps (or option-
ally, siren chirps).  This feature is the "full time" removal of the confir-
mation chirps; otherwise temporary onetime silent operation may be
achieved when desired by pressing and releasing the transmitter's
OPTION button twice when arming or disarming the system.  Even if
this feature is used to remove the confirmation chirps, the audible
Automatic Transmitter Verification

 

feature will still operate as de-

scribed on pages 16-17.

#14  Confirmation Chirps While In Valet Mode: Default OFF.
While the system is in the valet mode, the transmitter will still re-
motely lock and unlock the vehicle's doors. This feature adds the
confirmation horn chirps if the transmitter is used to lock or unlock
the doors while the system is in valet mode.

#15  Activated Alarm Cycle 60 or 30 Seconds: Default 60 Sec-
onds. 
 This feature offers a choice of activated alarm durations.  When
programming, pressing the remote transmitter's LOCK button sets
the cycle at 60 seconds, and pressing the UNLOCK button sets the
30 second time.

#16  Lights On Upon Disarm: Default ON.  This feature turns on
the parking lights (and interior lights with the UltraOne) for 30 sec-
onds after the two flashes upon disarming the system. The longer
time allows inspection of the area around and inside the vehicle when
approaching in the dark.  When programming, pressing the remote
transmitter's LOCK button sets the lights being on for 30 seconds,
and pressing the UNLOCK button configures the system to only flash
the lights twice.

#17  Disarm Alarm Upon Trunk Release: Default ON.  This Fea-
ture automatically disarms the system when the OPTION button is
pressed to operate the Option Output (trunk release).  If this feature
is turned off, the trunk release will still operate, but the system will
remain armed.  When this feature is on, activating the trunk release
will be accompanied by two horn chirps and the lights illuminating (if

Page - 24

Summary of Contents for UltiMate















Reviews: