Page - 11
How to Disarm the System Without Using the Transmitter
Step 1 - While the system in the armed condition, enter via
the driver's door. Be aware that the system will activate
when the door is opened, sounding the horn, flashing the
lights, and locking the doors if the door entered is closed
again before disarming the system.
Step 2 - Using your key, turn the ignition on. The following
step must be performed within the next 10 seconds.
Step 3 - Press and release the Valet Switch equal to the
number programmed for stage #1; the factory setting is
one.
If the default setting of 1 and 0 presses is retained,
press and release the Valet Switch once and the system
will instantly disarm, as indicated by two horn chirps.
Valet Switch. This programmable feature, which is explained in
detail on pages 20-21, allows you to further enhance the
effectiveness of your security system by "hardening" its resistance
to being defeated. The factory-set default for Selectable Code
Override is one press at stage 1, and NO press at stage 2; this
is the most convenient and user-friendly setting. Therefore, the
following step-by-step instructions reflects first the default setting,
and then the following text continues to explain the custom-
programmed setting.
If stage #2 presses have been programmed, the system will not
disarm, but pause and chirp the horn before continuing to sound.
When a stage #2 entry is required, at this point the stage #2 entry
must be made within 10 seconds. If both stage's entries are correct,
the system will disarm shortly after the stage #2 entry. After a failed
attempt to achieve Selectable Code Override, the ignition switch
must be turned off, then on again before another attempt is made.
If two failed Selectable Code Override attempts are made, the
system will ignore any further presses of the Valet Switch for two
minutes. If this occurs, the system will reset to the armed state, then
sound the horn twice after 2 minutes to indicate that another attempt
#
FEATURE
DEFAULT
1
Selectable Coded Override
1 & 0 (see page 20)
2
Last Door Arming
OFF
3
Automatic Rearming
OFF
4
Starter Interrupt Circuit
ON
5
Automatic Starter Interrupt
OFF
6
Ignition Activated Override
OFF
7
Doors Lock With Last Door Arming
OFF
8
Doors Lock With Automatic Rearming
OFF
9
Doors Lock With Ignition
ON
10
Ignition OFF Unlock #1
ON
11
Ignition OFF Unlock #2
ON
12
Open Door Bypass To Previous Three Features
ON
13
Confirmation Chirps
ON
14
Confirmation Chirps In Valet Mode
OFF
15
Activated Alarm Cycle
60 Seconds (ON)
16
Lights On Upon Disarm
ON
17
Disarm Alarm Upon Trunk Release
ON
18
Doorlock Pulse Time
.8 second (ON)
19
Double Unlock Pulse
OFF
20
Arming Delay
3 Seconds (ON)
21
Pulsed Horn / Steady Siren Output
Pulsed Horn ( ON)
22
Horn Chirp Level
Level 2 (OFF)
23
Total Closure Lock Output
OFF
24
Alarm Functions Bypass
OFF
25
Ignition-Activated Anti-Carjacking Protection
OFF
26
Door-Activated Anti-Carjacking Protection
OFF
27
Open Door Warning Upon Arming
OFF
28
PANIC Button Operates "Panic" or Additional Output Panic (ON)
29
Transmitter-Activated Anti-Carjacking Protection
OFF
30
Doorlocking In Add-on Mode
OFF
Page - 18
