Page
Page
- 28
(Selected From Learning Code Feature #6:)
Alarm comes with this feature turned "On".
With Feature #6 In The "ON" Position: Anytime the door lock circuit is activated, this feature #6
is programmed to send a .8 second negative pulse to a optional relay that will interface with the
vehicle's door locking system.
With Feature #6 In The "OFF" Position: When the door lock circuit is activated it will send a
3 second negative pulse to a relay that will interface with the vehicles door locking system.
(Selected From Learning Code Feature #7:) Alarm comes with this feature turned "On".
With Feature #7 In The "ON" Position: Feature #7 programs the alarm to be armed 3 seconds after
the arming siren chirp confirmation.
With Feature #7 In The "OFF" Position: Feature #7 programs the alarm to be armed 45 seconds
after the arming siren chirp confirmation.
(Selected From Learning Code Feature #8:)
Alarm comes with this feature turned "On".
With Feature #8 In The "ON" Position: Feature #8 programs the alarm to have the siren chirp for
the arming and disarming confirmation.
With Feature #8 In The "OFF" Position: Feature #8 programs the alarm "not" to have any siren
chirp for the arming and disarming confirmation.
By Following steps 1, 2, and 3 on page 16, you will be in the feature programming mode. To turn
"on" or "off" feature #6, #7 or #8 follow the steps below:
Step #4: Press the Easy Valet
TM
button switch 6, 7, or 8 times and the siren will chirp the same to
confirm that you are in the feature program. You now have 10 seconds to start step #5.
Step #5: Within the next 10 seconds, turn the feature "on" or "off":
Turning "on" feature #1: Press the large transmitter button. The siren will chirp once to
confirm that the feature was turned on.
Turning "off" feature #1: Press the small transmitter button. The siren will chirp twice to
confirm that the feature is turned "off"
Door Lock Timing / Arming Delay / Chirp Elimination
- 29
List Of The 8 Features That Can Be Changed As The Instructions Say On Page 30:
Feature #1 = Ignition On/Off to lock & unlock doors.
Feature turned "on" = Press arm/disarm transmitter button.
Feature turned "off" = Press #3 channel transmitter button.
Feature #2 = Open door bypass add to feature #1 above.
Feature turned "on" = Press arm/disarm transmitter button.
Feature turned "off" = Press #3 channel transmitter button.
Feature #3 = Disarming lights stay on 30 or 60 seconds.
Feature with 60 seconds lights on = Press arm/disarm transmitter button.
Feature with 30 seconds lights on = Press #3 channel transmitter button.
Feature #4 = Re-arm alarm 90 seconds after disarm from transmitter.
Feature turned "on" = Press arm/disarm transmitter button.
Feature turned "off" = Press #3 channel transmitter button.
Feature #5 = Disarm alarm automatically when trunk release is activated.
Feature turned "on" = Press arm/disarm transmitter button.
Feature turned "off" = Press #3 channel transmitter button.
Feature #6 = Door lock pulse time .8 or 3 seconds.
Feature with .8 second door lock pulse time = Press arm/disarm transmitter button.
Feature with 3 seconds door lock pulse time = Press #3 channel transmitter button.
Feature #7 = 3 or 45 second arming delay after chirp confirmation.
Feature with 3 second arming delay = Press arm/disarm transmitter button.
Feature with 45 second arming delay = Press #3 channel transmitter button.
Feature #8 = Chirp confirmation on or off.
Feature turned "on" = Press arm/disarm transmitter button.
Feature turned "off" = Press #3 channel transmitter button.
C h a n g i n g F e a t u r e F u n c t i o n s
