11
A matrix of all programmable features and their options are listed below� For detailed informa-
tion on each feature, please refer to the operation manual� Use the procedure below to make any
necessary changes�
PROGRAMMING FEATURES
Programmable Feature Matrix
Programmable Features
* Default
Step 1
Turn the ignition key “ON”, then “OFF”
Step 2
Within 5 seconds of step 1, press the valet switch 5 times to access features�
~ The siren/horn will sound and the status light will begin to flash.
Step 3
Within 10 seconds of step 2, press the valet switch the number of times corresponding
with the desired feature’s number�
~ The siren/horn will sound and the status light will flash equal to the selected feature.
Step 4
Change the feature by pressing the Lock/Unlock button that corresponds with the desired
setting�
~ The siren/horn will sound and the status light will turn on or off to confirm the selected setting.
Step 5
If you wish to change more features, repeat steps 3 & 4 at this time�
Step 6
To exit programming, turn the ignition key “ON” then “OFF”� Or, you can wait 10 seconds
for programming mode to expire�
Feature Programming: Ignition on, off, press valet 5 times�
# Feature
Lock Button
Unlock Button
User Features
1 Confirmation Chirps
On
Off *
2 Last Door Arming
On
Off *
3 Automatic Rearming
On
Off *
4 Lock w/ Last Door Arming
On
Off *
5 Lock w/ Automatic Rearm
On
Off *
6 Ignition Lock & Unlock
On
Off *
7 Ignition Anti-Carjacking
On
Off *
9 Door Anti-Carjacking
On
Off *
Installer Features
9 Parking Light Override Mode
On
Off *
10 3rd Channel Activation
Lock, Lock
Lock, Unlock, Lock *
11 15 Second Entry Delay
Off *
On
12 Lock/Unlock Outputs w/ Arm/Disarm
On
Off *
13 Arm/Disarm Input Pulse
80ms *
120ms
Feature #9 Auto Learn
- Within 60 seconds of applying power to the AL-100-DP, you can
press the Lock button on the OEM remote twice to select the proper setting for feature #9� The AL-
100-DP will monitor the Pink & White input wires and automatically set feature #9 as needed and
arm upon the second Lock press� If nothing is done during this window no change will be made� At
any time you can enter programmable features to change this feature manually�
