10
This device complies with FCC Rules part 15� Operation is subject to the fol-
lowing two conditions, (1) This device may not cause harmful interference and,
(2) This device must accept any interference that may be received, including
interference that may cause undesired operation�
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment�
Feature #11 - 15 Second Entry Delay
Off
(press “
lock
” button to program)
- DEFAULT
On
(press “
unlock
” button to program)
This feature allows a 15 second delay upon entering the vehicle to disarm by turning the ignition
“on” before triggering the alarm� This feature requires the system be armed via Last Door Arming�
Feature #12 - Lock/Unlock Outputs w/ Arm/Disarm
On
(press “
lock
” button to program)
Off
(press “
unlock
” button to program)
- DEFAULT
This feature allows the lock/unlock outputs to operate every time the system is armed/disarmed�
This allows the addition of non-OEM locks on vehicle additions like locking tool boxes or cargo
covers�
Feature #13 - Arm/Disarm Input Pulse
80ms
(press “
lock
” button to program)
- DEFAULT
120ms
(press “
unlock
” button to program)
This feature sets the door lock pulse width requirement for the arm/disarm input�
Feature #10 - 3rd Channel Activation
Lock/Lock
(press “
lock
” button to program)
Lock/Unlock/Lock
(press “
unlock
” button to program)
- DEFAULT
This feature controls the remote sequence used to activate the 3rd channel output, described on
page 7 of AL-100-DP Owners Manual�
Feature #9 - Parking Light Override Mode
On
(press “
lock
” button to program)
Off
(press “
unlock
” button to program)
- DEFAULT
This feature configures how the system monitors the lock/unlock circuit in the vehicle to properly
arm/disarm operation� Complete wiring and operation is described on Page 8�
Installer Programmable Features
Note:
User Features 1 thru 8 are listed in the owner’s manual