Step 6:
Pull follower unit out and fasten caddy
to follower using (3) #6 x 1 1/4" screws.
(See figure 6).
(3) #6 x 1 1/4" Screws
Figure 6
Omega National Products
1010 Rowe St.
Elkhart, IN. 46516 USA
www.omeganationalproducts.com
Form OME-063, 01/2007
©Omega National Products
Outside
Step 5:
Using supplied drilling template mark and then
drill (3) 3/32" pilot holes in back of caddy on
side unit is to hinge on. (See figure 5)
Figure 5