Form OME-091, 05/2013
©Omega National Products
Step 9:
Determine the height of the Chimney and cut
to length. Cut the top of the chimney only.
Reposition the roller catches if necessary.
Step 12:
Snap the Chimney to the Chimney Mounting
Blocks and trim as necessary.
Step 10:
Determine where the Chimney Mounting
Blocks should be located and mount securely
to the wall (See figure 10).
Figure 10
Figure 12
Step 11:
Make all ventilation and electrical connec-
tions at this time. (These must be done in
accordance with all applicable building codes
and requirements in your area). Reinstall the
blower faceplate and filters.
