background image

2

Figure 1 - Typical Long Chassis Jack Nomenclature (22051C shown)

SAFETY AND GENERAL INFORMATION

Save these instructions. 

For your safety, read, understand, and follow the information provided with and on this 

device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics 

and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use 

and repair of this product may require special skills and knowledge. Instructions and safety information shall be read 

to and discussed with the operator in the operator's native language, making sure that the operator comprehends 

their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this 

device, remove from service immediately. 

Inspect before each use.

 Do not use if abnormal conditions such as cracked welds, damaged, loose or missing 

parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall 

be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an 

abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact 

distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be 

made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer. 

PRODUCT DESCRIPTION

Omega Long Chassis Hydraulic Service Jacks are designed to lift, but not support, one end of a vehicle. Immediately 

after lifting, loads must be supported by a pair of appropriately rated jack stands. Air actuated function available for 

Models 22051C & 22101C.

 

Air actuated units require at least 7.8 CFM @ 110 - 175 PSI. A minimum of 150 PSI air 

pressure is required to raise rated capacity load.

SPECIFICATIONS

Model

Capacity

Jack Size ( L x W x H)

Min. Height Max. Height Saddle Dia.

 22050C/22051C

5 Ton

57-3/4" x 17" x 7-5/8"

7"

27"

6-1/2"

 22100C/22101C

10 Ton

54-3/4" x 20" x 12-3/4"

7"

27"

7-3/8"

Handle Position Lock

Release Valve 

(Handle Knob)

Saddle

Foot Pedal

Oil Filler Plug/Screw

(reference parts drawing 

for location)

Handle

Front Wheel

Rear Caster

Lift Control Valve

(for Air Actuated models only)

Handle Sleeve

Grease Fitting

Summary of Contents for 22101C

































Reviews: