KNOW YOUR OMEGA JUICER
TO ASSEMBLE:
STEP 1
Place receptacle behind motor base housing.
STEP 2
Place
bowl
on
motor base housing
with
spout facing you and in the middle of the two raised
projections.
STEP 3
Place
coupling
on top of bowl with groove
in the middle, aligned with spout.
STEP 4
Place strainer basket inside bowl, making
certain that it rests flat on platform center hex nut
.
STEP 5
Insert
cutter blade
inside
strainer basket
with teeth up, centering it over hex nut.
STEP 6
Tighten
nut
finger tight. Do not over tighten.
STEP 7
Place
cover
on
bowl
with ejection chute
opening to rear.
STEP 8
Place tabs of latch arms over cover and secure.
STEP 9
Insert
plunger
in
cover
opening.
TO DISASSEMBLE:
STEP 1
Remove
plunger
from
cover
opening.
STEP 2
Release both side latch arms by inserting
fingers into the two side openings at the bottom of the
motor base housing and pulling outward and upward.
STEP 3
Remove
cover
.
STEP 4
Unscrew
nut
by turning counterclockwise.
STEP 5
Lift out
bowl, basket
and
cutter blade
together.
STEP 6
Remove
strainer basket
,
coupling
and
blade
from
bowl
.
SPECIAL NOTE: The stainless steel basket is a
precision-engineered item that should be handled
carefully. This will help the juicer run efficiently,
smoothly, and for a very long time.
OMG-230_O2manual_v5.qxd 8/31/04 3:06 PM Page 3
