background image

WARRANTY/DISCLAIMER

OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a
period of 

13 months

13 months

 from date of purchase.  OMEGA Warranty adds an additional one (1) month grace

period to the normal 

one (1) year product warranty

one (1) year product warranty

 to cover handling and shipping time.  This

ensures that OMEGA's customers receive maximum coverage on each product.
If the unit should malfunction, it must be returned to the factory for evaluation.  OMEGA's Customer
Service Department will issue an Authorized Return (AR) number immediately upon phone or written
request.  Upon examination by OMEGA, if the unit is found to be defective it will be repaired or replaced at
no charge.  OMEGA's WARRANTY does not apply to defects resulting from any action of the purchaser,
including but not limited to mishandling, improper interfacing, operation outside of design limits,
improper repair, or unauthorized modification.  This WARRANTY is VOID if the unit shows evidence of
having been tampered with or shows evidence of being damaged as a result of excessive corrosion; or
current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating
conditions outside of OMEGA's control.  Components which wear are not warranted, including but not
limited to contact points, fuses, and triacs.

OMEGA is pleased to offer suggestions on the use of its various products.  However,

OMEGA is pleased to offer suggestions on the use of its various products.  However,

OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any

OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any

damages that result from the use of its products in accordance with information provided by

damages that result from the use of its products in accordance with information provided by

OMEGA, either verbal or written.  OMEGA warrants only that the parts manufactured by it will be

OMEGA, either verbal or written.  OMEGA warrants only that the parts manufactured by it will be

as specified and free of defects.  OMEGA MAKES NO OTHER WARRANTIES OR

as specified and free of defects.  OMEGA MAKES NO OTHER WARRANTIES OR

REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF

REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF

TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY

TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.  LIMITATION OF

AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.  LIMITATION OF

LIABILITY: The remedies of purchaser set forth herein are exclusive and the total liability of

LIABILITY: The remedies of purchaser set forth herein are exclusive and the total liability of

OMEGA with respect to this order, whether based on contract, warranty, negligence,

OMEGA with respect to this order, whether based on contract, warranty, negligence,

indemnification, strict liability or otherwise, shall not exceed the purchase price of the

indemnification, strict liability or otherwise, shall not exceed the purchase price of the

component upon which liability is based.  In no event shall OMEGA be liable for

component upon which liability is based.  In no event shall OMEGA be liable for

consequential, incidental or special damages.

consequential, incidental or special damages.

CONDITIONS:  Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a "Basic
Component" under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical
applications or used on humans.  Should any Product(s) be used in or with any nuclear installation or
activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility
as set forth in our basic WARRANTY/DISCLAIMER language, and additionally, purchaser will indemnify
OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the
Product(s) in such a manner.

RETURN REQUESTS/INQUIRIES

Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department.  BEFORE
RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN
(AR) NUMBER FROM OMEGA'S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID
PROCESSING DELAYS).  The assigned AR number should then be marked on the outside of the return
package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent
breakage in transit.
FOR 

WARRANTY

WARRANTY

 RETURNS, please have the

following information available BEFORE
contacting OMEGA:
1. P.O. number under which the product was

PURCHASED,

2. Model and serial number of the product under

warranty, and

3. Repair instructions and/or specific problems

relative to the product.

FOR 

NON-WARRANTY

NON-WARRANTY

 REPAIRS, consult OMEGA

for current repair charges.  Have the following
information available BEFORE contacting OMEGA:
1. P.O. number to cover the COST

of the repair,

2. Model and serial number of the product, and
3. Repair instructions and/or specific problems

relative to the product.

OMEGA's policy is to make running changes, not model changes, whenever an improvement is possible.  This affords
our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 1996 OMEGA ENGINEERING, INC.  All rights reserved.  This document may not be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without prior
written consent of OMEGA ENGINEERING, INC.

Summary of Contents for OM5-C

























































Reviews: