Changing the controller’s parameter settings:
3.5
Approximate Target Plate Temperature Transition Chart
Figure 9. Approximate Target Plate Temperature Transition Times
The CL900A/CL950A heat-up and cool-down characteristics are illustrated in
Figure 8. The chart illustrates the approximate time required to make a transition
from one probe well temperature to another. First, determine the current probe
well temperature and go to the corresponding row. Next, decide the new target
plate temperature and go to the appropriate column. Note that there are X’s
along the diagonal where original and target temperatures are the same.
3.6 Replacing the Probe Well Inserts in the CL900A
As shown in Figure 1, there are several different probe well inserts available for
the CL900A/CL900A-230. The CL900A is shipped with the CL906 insert
(diameter=1/4", depth=6") and the CL900A-230 is shipped with the CL906-M
insert (diameter=4.5 mm, depth=152.4 mm). 2 operations are required to be done
at the same time to remove the probe well:
Operation
3
3-5
1. Press the
key to enter the programming mode. The lower display will
alternately display the menu level and “Ac.Cd.”
2. Use the
and
keys to change to the desired menu level.
3. Once you have chosen the desired menu use the
key to scroll through the
parameters. To change the setting of a given parameter, use the
and
keys.
4. To save settings press the
key. The controller now exits the programming
menu and return to the normal operating mode.
5. To change settings on other menu levels, you must re-enter the programming
menu (from step #1).
100
°
F
100
°
F
500
°
F
9 min.
25 min.
21 min.
15 min.
900
°
F
500
°
F
108 min.
900
°
F
132 min.
FROM:
TO:
Summary of Contents for hot point CL900A Series
Page 8: ...CL900A CL950A SERIES 1 1 4 NOTES...
Page 25: ...NOTES CL900A CL950A SERIES 9 2...
Page 26: ...NOTES CL900A CL950A SERIES 9 3...
