OMEGA ALTISE
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT
:
Read the safety precautions of this booklet carefully before attempting to assemble, install, operate or
maintain the product described. Protect yourself and others by observing all safety information. Failure
to comply with instructions could result in personal injury and/or property damage. If you are unsure
about anything regarding your fan or these instructions, please contact Omega Altise on 1300 795 572 in
Australia or (09) 415 6000 in New Zealand before operating your appliance
.
•
This unit is not intended for use by children or infirm person without supervision.
WARNING:
The Function Switch should not be used as the sole means of disconnecting
power. Always unplug the power cord before servicing or moving the appliance.
•
The A-weighted sound pressure level is below 51 db.
•
The appliance shall be disconnected from its power source during service.
•
Always operate the unit from a power source of equal voltage, frequency and rating as indicated on
the product identification plate.
•
Always use a power outlet that is grounded.
•
Do not operate with wet hands. Prevent water from spilling onto the unit.
•
Do not immerse or expose the unit to rain, moisture or any other liquid.
•
Do not leave the unit running unattended. Do not tilt or turn over the unit.
•
Do not unplug while the unit is operating.
•
Do not use an extension cord or an adapter plug.
•
Do not put objects on the unit.
•
Do not climb or sit on the unit.
•
Do not insert fingers or other objects into the air outlet.
•
Do not touch the air inlet or the aluminum fins of the unit.
•
Do not operate the unit if it is dropped, damaged or showing signs of product malfunction.
•
Do not clean the appliance with any chemicals.
•
Ensure the unit is far away from fire, inflammable, or explosive objects.
•
The unit shall be installed in accordance with national wiring regulations.
•
The appliance shall be stored in a room without continuously operation sources (for example: open
flames, an operating gas appliance or an operating electric heater).
•
The appliance shall be stored so as to prevent mechanical damage from occurring.
•
Do not piece or burn, even after use.
•
Be aware that refrigerants may not contain an odour.
•
Pipework shall be protected from physical damage and shall not be installed in an unventilated space, if
that space is smaller than 12 m².
•
Keep any required ventilation openings clear of obstruction.
•
Any person who is involved with working on or breaking into a refrigerant circuit should hold a current
valid certificate from an industry-accredited assessment authority, which authorizes their competence
to handle refrigerants safely in accordance with an industry, recognized assessment specification.
•
Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and
repair requiring the assistance of other skilled personnel shall be carried out under the supervision of
the person competent in the use of flammable refrigerants.
•
The appliance shall be stored in a well-ventilated area where the room size corresponds to the room
area as specified for operation.
WARINNG: To avoid danger of electric shock, unplug from outlet when not in use and before
cleaning. If the supply cord is damaged, it must be replaced by the manufacturer, its
Service Agent or similarly qualified persons in order to avoid a hazard. In order to avoid
overheating, do not cover the appliance. Do not use the appliance in the immediate
surrounding of a bath, shower or swimming pool.
3