5
Placement
Placement and Installation
Place the
on flat and dry ground, and keep at least 50 cm from walls etc
(figure 1)
Installation
• Spin slide bar connector into exhaust hose first, then spin the exhaust hose into
exhaust connector (counter-clockwise).
• Put slide bar connector into adjustable slide bar, adjust window open width in
order slide bar match window well, and the length of slide bar is adjustable.
(figure 2)
FIGURE 1
Installation Errors
• Free access of exhaust pipe is important, If air is not taken out it will affect
performance of the appliance.
• Avoid sharp bends in the exhaust-pipe (figure 2)
• Make sure air in exhaust pipe can run smoothly (figure 3)
Summary of Contents for OAPC1617
Page 1: ...OAPC1617 PORTABLE AIR CONDITIONER...
Page 7: ...7 Parts List...
Page 15: ...Appendix A Circuit Diagram...
