omega altise
3
Assembly Instructions
Your pedestal fan has been boxed unassembled to minimise packaging waste. Each
part is designed to fit together and be disassembled easily for cleaning or storage.
Assemble the base to the support pole using the fasteners provided.
Loosen the height adjustment ring and extend the support pole to your desired
height.
Put the base cover over the cross base.
Retighten the height adjustment ring to prevent slipping, then place the fan assembly
onto the pole and tighten the pole screw manually.
To assemble the safety grille and blade assembly, remove the spinner (by turning it
clockwise), then the locking nut (by turning it anticlockwise) from the motor spindle.
Place the back safety grille into position. Ensure the safety grille fits onto the locating
lugs (Fig.1). If this is done correctly, the safety grille’s carry handle will be at the top.
