4
PRESSURE EQUIPMENT DIRECTIVE PED 2014/68/EU (Fluid group 2)
B-AIR 0076
–
B-AIR 0476
Not required
B-AIR 0706
Category 1, Module A
There is Technical datasheet available. For additional technical specification, contact
manufacturer.
Safety instructions
The relevant safety at work and accident prevention
regulations, plus operating instructions, shall apply for
operating the filter. The filter has been constructed by
the generally recognized rules of engineering. It
complies with the requirements of directive 2014/68/EU concerning pressure equipment.
Ensure that installation complies with local laws for operation and routine testing of
pressure equipment at the place of installation.
The operator/user of the filter should make himself familiar with the function, installation,
and start-up of the unit. All the safety information is always intended to ensure your safety.
•
Do not exceed the max. operating pressure or operating temperature range (see data
label).
•
The permissible working temperatures and pressures for ad-on parts and filter
elements are given under technical data for those add-ons. The maximum
temperature and pressure for the assembled system are the lowest of any individual
part.
•
It is necessary to ensure that the unit is equipped with the corresponding safety and
test devices to prevent the permissible operating parameters from being exceeded.
•
The filter has been designed for primarily static pressure. Rapid changes in pressure
are not allowed.
•
Ensure that the filter is not subject to vibrations that could cause fatigue fractures.
•
A filter is not to be subjected to mechanical stresses.
•
The medium used may not have any corrosive components that could attack the
materials of the filter in a way that is not permitted. Do not use the filter in
hazardous areas with potentially explosive atmospheres.
•
All installation and maintenance work on the filter may only be carried out by trained
and experienced specialists.
•
It is forbidden to carry out any work on the filter and piping, including welding and
constructional changes, etc.
•
A pressure gauge, which shows the operational pressure, must be installed in the
unit, respectively, in the pipeline.
