7. Use and maintenance manual
B01.35-B02.45
San Maurizio C.se - 15/12/2020
www.omcr.it
LIFTING BRACKET
ART. NUM.
NR. SCREWS
SCREWS DIN
912 CL. 8.8
CLAMPING COUPLE
[Nm]
B01.35.42500
6
M36x250
2481
SCREWS DIN 912 CL. 8.8
KEYS
DIE AXIS
PIN INSERTION DIRECTION
BARRIER TO AVOID
THE WRONG PINS INSERTION
Fig.1
WARNING
3.3
At the moment of the use, check the correct screws clamping and the use of screws with the
required lengths; in the following table are written down screws and clamping couples for the
fixing of the lifting brackets;
it is recommended to use threadlocker LOCTITE 243 or lock
washers
.
Absolutely ensure a minimum screws clamping of 1 x Ø screw.
Example: for M36 screws use a minimum clamping of 36 mm.
WARNING
The missing respect of the prescriptions included in this manual may cause the accidental fall of the load.
B01.15. lifting brackets should be mounted on steel plates (minimum quality Fe510, S355)
with keys. It is recommended to provide barriers to avoid the wrong pins insertion
(see
Pic.1
).
WARNING
3.4
3.4.1 - APPLICATION ON FLAT SURFACE
