10. Use and maintenance manual
B01.35-B02.45
San Maurizio C.se - 15/12/2020
www.omcr.it
LIFTING HOLE
Pic.6
4.2
If not used the lifting brackets must be stored far from wet and preserved from oxidation by appling
protective oil.
LIFTING BRACKET
ART. NUM.
WEIGHT (kg)
lifting pin included
B01.35.42500
Pic.5
Don’t stand or transit nearby the load during lifting, handling or overturning operations (see
Pic.5
).
In case of accidental release of the load there may be risks of injury.
WARNING
3.10
4. HANDLING AND STORAGE
In the following table are written OMCR B01.35. lifting brackets weights;
the lifting
brackets must be handled in compliance with the current norms concerning the
movement by hand of the loads
(see
Pic.6
).
WARNING
4.1
At the moment of the assembling, carefully clean the contact surfaces between lifting
brackets and steel plates.
The presence of oil or dirt on the contact surface between the lifting bracket and the mold
holder plate may compromise the correct functioning of the lifting bracket
WARNING
4.2.1
