9. Use and maintenance manual
B01.11
S. Maurizio C.se - 18/12/2020
www.omcr.it
In case of lifting and handling, the lifting bracket capacity load should be at least
1/2
of the whole die weight.
(upper half-die + lower half-die).
Example: Die weight 10.000 kg - minimum lifting bracket capacity load: 10.000 / 2 = 5.000 kg
In case of half-die overturning the lifting bracket capacity load should be at least
1/2
of the half-die weight.
Example: Half-die weight 5.000 kg - minimum lifting bracket capacity load: 5.000 / 2 = 2.500 kg
Before each lifting / handling / overturning of the die be sure that:
the ropes are secured in correct way;
the ropes are not in contact with cutting edge;
the ropes are not hooked to the die corners.
WARNING
3.9
To prevent the sling accidental extraction, don’t make lifting / handling / overturning with
sling angle bigger than 90° from the horizontal level (see
Pic.4
).
WARNING
3.8
Pic.4
50°
<50°
Summary of Contents for B01.11
Page 13: ......
