12
Maintenance
cord from AC outlet when a power outage occurs. When power has been restored, wait 3 to 5 minutes then
re-plug the power cord to AC outlet.
VACATION AND MOVING CARE
•
For long vacations or absences, unplug the wine cellar and clean the wine cellar and door gaskets
according to “General cleaning” section. Leave doors open, so air can circulate inside.
•
When moving always move the wine cellar vertically. Do not move with the unit lying down, as possible
damage to the sealed system could occur.
Note: After moving, wait 24 hours before plugging in the wine cellar.
Troubleshooting
Many common issues with your wine cellar can be easily solved. Try the troubleshooting tips below if you
experience any problems.
WINE CELLAR DOES NOT OPERATE
•
Check if wine cellar is plugged in.
•
Check if there is power in the AC outlet, by checking the circuit breaker.
WINE APPEARS TOO WARM
• Frequent door openings.
•
Allow time for recently added wine to reach desired temperature.
•
Check gaskets for proper seal.
•
Clean condenser coils.
•
Adjust temperature control to colder setting.
WINE TEMPERATURE IS TOO COLD
•
If temperature control setting is too cold, adjust to a warmer setting.
WINE CELLAR RUNS TOO FREQUENTLY
•
This may be normal to maintain constant temperature during high temperature and humid days.
• Doors may have been opened frequently or for an extended period of time.
•
Clean condenser coils.
•
Check gasket for proper seal.
•
Check to see if doors are completely closed.
MOISTURE BUILD-UP ON INTERIOR OR EXTERIOR OF THE WINE CELLAR
•
This is normal during high humidity periods.
• Prolonged or frequent door openings.
•
Check door gaskets for proper seal.
