8
Operation
BEFORE USE
•
Plug refrigerator into the 110V exclusive socket.
• After the refrigerator is running, confirm that air suction/filtration is in order and that it is sufficiently cold.
After checking to make sure the refrigerator is working properly, it may be used.
DIGITAL TEMPERATURE CONTROLLER
Small, integrated digital controller, which is applicable to the compressor of 1 Hp.
Main functions are: Temperature Display/Temperature Control/Manual-Automatic /Light Control/Value Storing/
Self-Testing/Parameter Locking.
FRONT PANEL OPERATION
1. Set temperature: Press button; set temperature will be displayed. Press or button to modify and
store the displayed value. Press button to exit the adjustment and display the cold-room temperature.
2. If no button is pressed within 10 seconds, the cold-room temperature will be displayed.
3.
Lighting: Press button to activate light in refrigerator; press again to turn off. Manual start/stop defrost:
Press button and hold for 6 seconds to either defrost or to stop defrost.
4.
Refrigeration LED: During refrigeration, the LED is on. When the cold room temperature is constant, the
LED is off. During delay start, the LED flashes.
5.
Defrost LED: During defrosting, the LED is on. When it stops defrosting, the LED is off. During the delay of
defrost, the LED flashed.
Maintenance
NOTE: THE FRONT GLASS DOOR IS INTENDED TO BE USED DURING CLEANING ONLY. DO NOT
OPEN THE FRONT GLASS DOOR TO ACCESS PRODUCT.
1. Cabinet Cleaning:
a. The product should be maintained and cleaned periodically with power supply disconnected. When
cleaning, use mild-rinsing water or non-corrosive products. Do not wash directly with water faucet.
b. Clean outside of unit using a soft cloth with neutral detergent, and dry with a separate soft cloth.
c. Clean inside racks by removing them from the unit and clean with water.
2.
When shutting down unit for a long period of time, take out all food and unplug wall socket. Clean inside
and outside thoroughly, and keep door open to sufficiently dry.
