7
Operation
BEFORE USE
Plug the refrigerator in a 110V~ socket exclusively for the unit. After the refrigerator is running, test the air
suction to confirm it is sufficiently cold. Then you may put food inside the unit. Make sure the food product is
already cooled before placing it in the display case. The unit should not be used to cool food products.
DIGITAL TEMPERATURE CONTROLLER
Features of the Controller:
• It Is a mini sized and integrated intelligent controller and applicable to the compressor of one Hp.
• The main functions are: Temperature Display/Temperature Control/Manual, Automatic Defrost by Burning
Off/Light Control/Value Storing/Self Testing/Parameter Locking.
Controller Operation:
1.
Set Temperature: Press
SET
button, the set temperature is displayed. Press or button to modify and
store the displayed value. Press
SET
button to exit the adjustment and display the cold-room temperature.
2. If no more button is pressed within 10 seconds, the cold-room temperature will be displayed.
3. Illumination: Press button, it lights; Press again, it stops. Manual start/stop defrost: Press button and
hold for 6 seconds to defrost or stop defrost.
4.
Refrigerant LED: During refrigeration, the LED is on; When the cold room temperature is constant, the LED
is off; During the delay start, the LED flashes.
5. Defrost LED: during defrosting, the LED is on; When it stops defrosting, the LED is off, During the delay
display of defrost, the LED flashes.
CAUTION
• Reducing the frequency of opening the refrigerator door will keep more cold air inside the refrigerator.
•
Do not block air suction or outlet. Air must continue circulating to increase refrigeration capability.
• Do not over fill or over stock the refrigerator, as it will influence the cooling effect. Adjust the rack height for
proper food storage.
• Cool hot food down to room temperature before storing it in the refrigerator.
•
Try to reduce open times and keep refrigerator cold and closed, if power is ever off. Only allow a skilled
service individual with proper tools to repair damaged power cables. Never touch compressor, as it can
result in injury.
