Omcan RE-CN-0036-C, Instruction Manual

Page: 14 / 28

14
Troubleshooting
Cabinet temperature is too warm. Thermostat set too warm. Set thermostat to lower
temperature.
Blocking air flow. Re-arrange product to allow for
proper air flow.
Excessive amount of warm product
placed in cabinet.
Make sure there is at least
four inches of clearance from
evaporator.
Fuse blown or circuit breaker
tripped.
Allow adequate time for product to
cool down.
Dirty condenser coil. Replace fuse or reset circuit
breaker.
Prolonged door opening or door
ajar.
Clean the condenser coil.
Evaporator coil iced over. Ensure doors are closed when not
in use. Avoid opening doors for
long periods of time.
Cabinet is noisy. Loose part(s). Locate and tighten loose part(s).
Tubing vibration. Ensure tubing is free from contact
with other tubing or components.