background image

6

Safety and Warranty

• 

Do not use extension cords.

•  Do not put your hands under the unit when the units is required to be moved.

• 

When the unit is not in use for a long period of time, please unplug the unit from the outlet.

• 

After unplugging the unit, wait at least 10 minutes before re-plugging it. Failure to do so could cause 

damage to the compressor.

UNPLUG CORD

•  To minimize shock and fire hazards, please do not plug or unplug the cord with wet hands.

• 

During maintenance and cleaning, please unplug the unit.

PROPER GROUNDING REQUIRED

•  To minimize shock and fire hazards, make sure that the unit is properly grounded.

PROHIBITION

• 

Do not attempt to remove or repair any component unless instructed by factory.

• 

Make sure that the unit is not resting on or against the electrical cord and plug.

• 

To minimize personal injury, do not hang on the doors.

•  Do not store any flammable and explosive gas or liquids inside the unit.

• 

Do not attempt to alter or tamper with the electrical cord.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure 

or other damages resulting from installation in non-commercial or residential applications. The right 

is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as 

possible.

2 YEARS PARTS AND LABOUR / 5 YEARS PARTS ONLY ON COMPRESSOR 

WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized 

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not 

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classified as normal solid urban waste and can therefore be disposed of 

without difficulty.

Summary of Contents for RE-CN-0021-G-HC





























Reviews: