9
Maintenance
Troubleshooting
ORDINARY MAINTENANCE FOR THE USER
As any equipment also our ovens requires simple, frequent and careful cleaning to ensure efficient, regular
functioning. It is recommended to never use chemical products which are not specific for food preparation
areas, abrasives or corrosives for any reason. Avoid by all means using water jets, tools, rough or abrasive
instruments, such as steel wool, brillo sponges or any other item which could damage the surface of the
machine, and especially those that could compromise health safety. Oven external areas cleaning, external
parts in stainless steel, door glass, and switch panel, must be carried out at cold oven and at disconnected
electric power supply. Use a sponge or a soft cloth, not abrasive, slightly humidified with water or possibly with
a neutral detergent not corrosive. In any case, do not use water jets which can penetrate through the electric
parts and heavily damage them, as well as bring a possible danger for people.
SYMPTOM
POSSIBLE CAUSE
SUGGESTED REMEDY
The oven does not heat even
though the temperatures are set
correctly. The pilot lights are off.
Main switch in position “0”.
Turn the main switch in position
“1”.
The oven doesn’t heat despite the
main switch is on (position 1) and
the temperatures are correctly
set. The function pilot lights of the
heating elements are off.
No electric Energy in the net.
Check the general contactor, the
socket, the plug, and the supply
cable.
The analogical thermometer
doesn’t notice the increase of the
temperature despite the heating
elements are correctly functioning.
Analogical thermometer defect.
Check and if necessary replace the
thermometer.
Inner light bulb does not switch on. Burned inner light bulb.
Replace inner light bulb.
Inner light bulb switch defected.
Replace light bulb switch.
No electric supply power on the
light bulb.
Check electric connection with the
light bulb.
The door is closed, but fume
comes out.
Exhauster butterfly valve closed.
Open more the valve and check
the right functioning.
The baking chamber does not heat
suitably.
The set temperature are too low.
Set the right temperature.
The baking chamber does not heat
suitably in spite of the temperature
being set rightly.
One or more heating elements are
defected.
Replace the defecate heating
elements.
Summary of Contents for PE-IT-0038-D
