9
Installation
Operation
materials can be disposed of as per normal procedures. If the appliance is destined to countries where there
are specific waste laws, dispose of packaging conforming with the local laws in force.
HANDLING APPLIANCE
As the following have wheels they can be manually moved by pulling.
CONNECTING TO ELECTRICITY SUPPLY
ATTENTION!
Check the electricity supply corresponds to the value given on the appliance ID plate. Electrical works can
only be carried out by specialized and authorized staff with prior authorization by the person in charge of the
appliance. Connect the appliance to a circuit provided with an efficient earth socket. If necessary use suitable
extension leads guaranteeing safety. The section (thickness) of the extension lead must be greater than the
appliance power supply cable. This avoids any hazardous overheating. Avoid pulling or twisting the power
cable as this can damage the internal wires.
CONTROLS AND INDICATORS
1.
Drive push-button (continuous). Press to start the blade.
2. Stop push-button. Press to stop the propeller transmission motor.
3. Reverse drive push-button. Press to start the blade in opposite direction to push-button “1”.
4. Network presence indicator light. Signals that the machine is connected to the electrical network
5. Drive indicator light. Signals that the tool of the machine is in movement. Located close to the start push-
button “3” and close to the reverse drive push-button “3”. Visible only when the control is operating.
TURNING THE APPLIANCE ON AND OFF
CHECKING CONNECTION TO ELECTRICITY SUPPLY
1.
Switch the on/off switch on the appliance to position “I”.
2. Press push button “1” for starting.
3. The indicator light “4” should come on.
