Omcan FP-BR-0014, Instruction Manual, Page: 6 / 24

6
Safety and Warranty
IMPORTANT
In case of emergency take off the plug from its socket.
IMPORTANT
Never spray water directly on to the equipment.
GENERAL SAFETY PRACTICES
IMPORTANT
If any recommendation is not applicable to your equipment, please ignore it.
The following safety instructions are addressed to both the operator of the machine as well as the person in
charge of maintenance. The machine has to be delivered only in perfect conditions of use by the Distributor
to the user. The user shall operate the machine only after being well acquainted with the safety procedures
described in the present manual. READ THIS MANUAL WITH ATTENTION.
BASIC OPERATION PROCEDURES
DANGERS
Some areas of the electric device have parts that are connected or have parts connected to high voltage.
These parts when touched may cause severe electrical shocks or even be lethal. Never touch manual
commands such as switches, buttons, turning keys and knobs with your hands wearing wet clothes and/or wet
shoes. By not following these instructions operator could be exposed to severe electrical shocks or even to a
lethal situation.
WARNINGS
• The operator has to be well familiar with the position of ON/OFF switch to make sure the switch is easy to
be reached when necessary.
• Before any kind of maintenance, physically remove plug from the socket.
• Provide space for a comfortable operation thus avoiding accidents.
• Water or oil spilled on the floor will turn it slippery and dangerous. Make sure the floor is clean and dry.
• Before using any commands (switch, buttons, lever), be sure it is the correct one. In case of doubt, consult
this manual.
• Never touch any manual commands (switch, buttons, lever) unadvisedly.
• If any work is to be made by two or more persons, coordination signs will have to be given for each
operation step. Every step of the operation shall be taken only if a sign has been made and responded.
ADVICE
• In case of power shortage, immediately switch the machine off.
• Use recommended or equivalent lubricants, oils or greases.
• Avoid mechanical shocks, once they may cause damages or bad functioning.
• Avoid water, dirt or dust contact to the mechanical and electrical components of the machine.
• DO NOT change the standard characteristics of the machine.
• DO NOT remove, tear off or damage any safety or identification labels stuck on the machine. If any labels
have been removed or are no longer legible, contact your nearest dealer for replacement.