6
Installation
CHECK SUPPLY VOLTAGE
The coffee machine is preset in the factory to the correct main voltage. Check if your local main supply voltage
complies with the information given on the type plate on the underside of the coffee machine.
CHECK ELECTRICAL FUSE
The coffee machine is designed for an electric current of 10 amps. Check if the electrical fuse has sufficient
capacity.
FILL WATER TANK
1. Only use fresh, cold water. Never fill in milk, mineral water, or other liquids.
2. Remove the water tank and rinse it with cold, tap water thoroughly.
3. Fill the water tank and reinstall it. Make sure to install the tank properly; it must engage audibly.
FILL COFFEE BEANS
1. To ensure that your machine will work perfectly for a long time and to avoid damage, please note that the
grinding gear of your coffee machine is not suitable for coffee beans which were treated, during or after
roasting, with additives (e.g. sugar). Such coffee blends may damage the grinding gear. Any repair costs
resulting from the use of such blends are not covered by warranty.
2. Open the bean tank cover and remove the aroma preservation cover.
3. Remove any dirt or foreign matter from the bean tank.
4. Fill coffee beans in the bean tank and close the cover.
ADJUSTING THE GRINDING GEAR
You can adjust the grinding gear to the roast of your coffee. We recommend:
Technical Specifications
Model
CM-CN-0200
Power
1330 W
Water Tank
1.9 litres / 2 quarts
Pump Pressure
Static, Max. 15 bar
Bean Tank Capacity
200 grams / 7 ounce
Coffee Grounds Container Capacity
Max. 15 portions
Power Cord Length
Approx. 1.3m / 51 3/16”
Electrical
120V / 60 Hz /1
Weight
9.5 kg. / 20.9 lbs.
Dimensions (DWH)
17.7” x 11” x 14.2” / 450 x 279 x 373mm
Packaging Dimensions
15.8” x 15.8” x 18.8” / 400 x 400 x 476mm
Item Number
21602