14
Instructions for Field Conversion
INSTRUCTION FOR NORMAL OPERATING SEQUENCE:
Pilot Burner Operation:
The units are equipped with standing pilots, and should be lit immediately after the gas is turned on.
•
Turn off main valve to unit and wait 5 minutes to clear gas.
•
Turn off all knobs and pilot valves.
•
Turn on main valve and light all pilots.
• The pilot burner must be lit at the end of the tube. Hold an ignition source (6” fire lighter). Through the
opening in the front panel at the pilot tube. When the flame is established remove the ignition source.
Burner Operation:
To ignite burners, turn burner valve knob to “High” position. Each burner is controlled by
an individual high-low, on-off valve. An infinite number of grilling temperatures may be obtained by turning the
burner valve knob to any position between high and low.
Derating at altitudes above 2000 ft (610 m):
Ratings of gas utilization equipment are based on sea level
operation and shall not be changed for operation at elevations up to 2000 ft (600m). For operation at elevations
above 2000 ft (600m), equipment ratings shall be reduced at the rate of four (4) percent for each 1000 ft
(300m) above sea level before selecting appropriately sized equipment.
Parts Breakdown
Model CE-CN-1219-G
37524
Item
No.
Description
Position
Item
No.
Description
Position
Item
No.
Description
Position
76278
Griddle Plate Assembly for TH-RGT-48
1
76285
Gas Valve for TH-RGT-48
8
76292
Burner for TH-RGT-48
15
76279
Drip Tray Support Rack for TH-RGT-48
2
76286
Gas Inlet Pipe for TH-RGT-48
9
76293
Screw for TH-RGT-48
16
76280
Nut for TH-RGT-48
3
76287
NG/LPG Conversion Valve for TH-
RGT-48
10
76294
Gas Inlet Pipe Protect Plate for
TH-RGT-48
17
76281
Drip Tray Assembly for TH-RGT-48
4
76288
Bottom Plate for Control Box for TH-
RGT-48
11
76295
Rear Plate for TH-RGT-48
18
76282
Drip Tray Leakage Pipe for TH-RGT-48
5
76289
Nozzle for Gas Valve for TH-RGT-48
12
76296
Pilot for TH-RGT-48
19
76283
Front Panel for TH-RGT-48
6
76290
Foot for TH-RGT-48
13
76284
Knob for TH-RGT-48
7
76291
Body Shell for TH-RGT-48
14
