10
Maintenance
DO NOT use detergent or oven cleaner to clean the griddle surface.
3.
Use a soft-bristled fiber brush in a circular motion to remove any remaining food particles.
4. Turn temperature control to OFF. Allow the griddle surface to cool, then wipe the surface with a clean cloth.
Dry the griddle surface thoroughly.
IMPORTANT: SEASON THE COOKING SURFACE AFTER EACH CLEANING.
5. At least once each day, the grease trough must be thoroughly cleaned. Using a scraper, remove all grease
and food waste from the grease trough by pushing it down the waste hole and into the grease tray.
6. After scraping all cooking waste from grease trough into the grease tray, take the grease drawer to the
kitchen cleaning area and properly dispose of all waste.
a. Clean drawer with hot water and a mild detergent.
b. Dry drawer thoroughly and reinstall in griddle.
7. Wipe down exterior of griddle cabinet with a clean cloth and non-abrasive cleanser. Rinse thoroughly with
water and a clean cloth. Dry with a soft clean cloth.
Troubleshooting
SYMPTOM
POSSIBLE CAUSE
SUGGESTED REMEDY
Pilot will not light.
Gas supply off.
Check main / unit gas valves.
Air in lines.
Turn pilot valve on. Attempt to light
pilot every 15 sec.
Pilot valve not on.
Turn pilot valve on / adjust.
Burners won’t light.
Gas supply off.
Check main / unit gas valves.
Air in lines.
Turn gas valve on. Attempt to light
pilot every 15 sec.
Pilot valve not lit.
Turn off gas - allow unit to vent for
5 minutes. Turn gas back on and
light pilot.
One burner assembly won’t light.
Control not on.
Turn temperature control to ON
Set to desired setting when lit.
Water in burner.
Remove burner and dry thoroughly.
Damaged temperature control,
Burner or other internal
component.
Contact Authorized Omcan Service
Agency for repairs.
Portions of a burner won’t light or
have erratic flame.
Flame opening(s) clogged.
Clean burner.
