10
Maintenance
Troubleshooting
CARE AND CLEANING
The Omcan Induction Cooktop is easy to keep clean. Be sure to follow these easy instructions:
•
Turn the unit OFF and remove the plug from any power outlets prior to cleaning.
•
When the unit is cool, wipe the surface and body with a damp cloth. Use a mild scouring agent on the
stainless steel housing for greasy or resistant soiling. DO NOT use a lye-based cleaner, such as an oven
cleaner, as it may damage the cooktop.
•
To clean the glass surface, use a mild detergent or glass cooktop cleaning cream.
•
Never immerse the cooktop in water or put it in the dishwasher.
NOTE
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm
to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect equipment to an outlet that’s on a different circuit than the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s warranty for the equipment.
Error
Error Code
Failure Analysis
Main board can not connect
with control panel.
EC/E16
Check the wire connection between the main PCB board
and display control board.
Circuit failure.
E0
Check the coil is it open circuit?
Empty Pan Protection.
E1
Is the pan placed on the induction cooker?
Is it an induction compatible pan?
Low Voltage Protection.
E2
Check if the voltage is low.
High Voltage Protection.
E3
Check if the voltage is high.
Temperature sensor open
circuit.
E4
Check if the Temperature sensor on heating sink was open
circuit, broken or unplug.
Temperature sensor short
circuit.
E4
Check if the Temperature sensor on heating sink.
Is the insulated leather broken or is the metal wire ex-
posed?
Check if the outlet is broken.
