11
CLEANING AND SANITIZATION
IMPORTANT:
Unplug the saw before to start Cleaning.
When the saw must go through a complete cleaning and sanitization process:
• Before it’s first use.
•
After every day end of operations.
• When the saw is not going to be used for a long period of time.
•
Before starting operation after a long period it has not been used.
Many parts may be removed for cleaning:
•
Upper Door.
• Lower Door.
•
Blade Guard.
• Movable Table.
•
Fixed Table Block.
•
Fixed Table.
•
Blade.
• Upper Wheel.
• Lower Wheel.
•
Blade Scraper.
• Wheel Scraper.
•
Blade Tension Regulator.
Follow the below instructions to remove the above mentioned parts:
UPPER DOOR:
Open the door #04 (Pic.01), and lift it.
LOWER DOOR:
Open the door #15 (Pic.01), and lift it.
BLADE GUARD:
Turn counter clockwise the two handles, just enough to loose the Blade Guard #01 (Pic.03),
then remove the Blade Guard pulling it towards the saw front side.
MOVABLE TABLE:
Pull the Movable Table #09 (Pic.01) towards the saw front side. Displace the end plate,
(see Picture 04), and slide the Movable Table completely out of the rollers.
FIXED TABLE BLOCK:
Remove the Fixed Table Block lifting the block above the Fixed Table (see Picture
05).
FIXED TABLE:
Lift vertically the Fixed Table front side, (Picture 06 see the arrow) until the lower trigger is
loose. Then pull the Fixed Table towards the front, (Picture 07 see the arrow) until the table is completely
removed.
BLADE:
Turn the Blade Tension Regulator Handle #01 (Pic.01) counter clockwise, until the blade gets loose,
for removing.
Maintenance
