7
Technical Specifications
Operation
Maintenance
Model
BL-GR-0450A
Power
350 W
Electrical
110V / 60Hz / 1
Speed
10,000 - 20,000 RPM
Switch 1
Double On/Off - 16A
Switch 2
Micro - 16A
Maximum Cycle of
Operation
5 minutes
Shaft Diameter
0.4” / 11mm
Malt Cup Capacity
3.8 cup / 900 mL
Weight
11 lbs. / 5 kgs.
Dimensions
7.4” x 6.1” x 18.3” / 188 x 155 x 465mm
Item Number
47459
The appliance has a double ON-OFF switch (0-1-2) which is mounted on the top of the appliance. The switch is
waterproof, and in the OFF position, disconnects both neutral and live. The unit is also equipped with a hidden
switch on the malt cup holder.
Operate the appliance by pressing the switch in position I or II. The I is for slow and II is for fast.
After pressing the switch in position I or II, you should place the malt cup in one of the two positions of the malt
cup holder and secure firmly, then the shaft will start to rotate. Once the malt cup is removed from its position
the shaft will stop operating.
In any case after use the appliance must be set to OFF, with the switch on the top of the appliance in position
0.
Caution: A magnetic field can develop near the device. If you are using a heart pacemaker and feel
discomfort, move away from the device and consult your doctor.
•
Before cleaning, unplug from the power socket, remove the malt cup and remove the agitator. Prevent
penetration of water into the head and any part of the device.
•
Clean the shaft and the agitator after each use. Using warm water with soap. Rinse with cold water.
