5
Safety and Warranty
the motor. You can mix grated ice, milk powder or ice cream.
•
The agitator of the appliance is not designed to grind, crush or cut edible and non-edible material, but only
to mix edible or drinkable liquids or soft foods (eg. ice cream).
• Do not place any material (supplement or otherwise) in the malt cup or other utensil while the shaft is inside
and mixing. Remove the utensil or malt, add the ingredients and place again for mixing/stirring.
• Do not fill the malt cup completely to avoid overflow during the mixing.
• Place the appliance on a flat surface that can withstand its weight and the drinks that you have produced.
•
Do not move the appliance while it is in operation.
•
After each use, the appliance and the stainless steel malt cup should be cleaned from any remaining
material.
•
Always unplug the unit when cleaning.
•
Always unplug the unit when performing maintenance.
•
Check the condition of the agitator and the shaft daily. Change the agitator at regular intervals or when it is
worn.
• Storage of the appliance should be in safe place not affected by weather conditions, overflowing of water,
etc.
•
Places with high humidity or dust, direct exposure to sunlight, near heating sources should be avoided.
• Ensure that sufficient space is maintained around the appliance, to make it easier to clean the unit and
its installation area, to ensure direct and easy access to the power socket for immediate disconnect if
required.
•
The agitator has a thread M6, and it is placed by turning it in the shaft clockwise, it is removed counter
clockwise. Always unplug the appliance before removing the agitator, and before placing again.
•
Do not touch the propeller or shaft of the device while is in operation.
•
Be careful that the agitator does not strike on the walls of the malt cup.
•
Unplug from power socket before moving the appliance. Never lift from the shaft.
•
The unit must not be operated by an external control system, which can turn the device on automatically.
•
Do not attempt to disassemble or modify the device. The parts of the appliance cannot be serviced by the
user. Never attempt a maintenance procedure that is not described in here.
• The finished drink should not remain in the malt cup.
CAUTION
•
This appliance is intended for professional use and should not be used by children and persons with
reduced physical, sensors or intellectual abilities or lack of experience and knowledge, they should
be supervised by a person responsible for their safety or have been given clear instructions about the
appliance and understand the dangers might occur.
•
Children should not play with the appliance.
•
Cleaning and maintenance should not by carried out by children.
•
Keep the appliance and the power cord away from children under 8 years old.
•
Do not switch on the appliance without the malt cup in its place.
•
Keep the appliance unplugged when not in use.
•
The agitator, the shaft and the malt cup of the appliance are intended to come into contact with food. When
cleaning these parts you should follow the rules of hygiene.
•
Do not use a pressurized water tapping device to clean the appliance.
• Do not place the appliance over an electric cooker or on surfaces that cause heat, as well as on flammable
