5
Safety and Warranty
IMPORTANT WARNINGS!
Very Important! CE SAFETY STANDARDS PROHIBIT THE USE OF THIS MINCER/GRINDER IN ALL
EUROPEAN COUNTRIES SUBJECT TO CE-EN STANDARDS IF THE MACHINE IS NOT EQUIPPED WITH
A SAFETY FRONT GUARD WHEN THE LAST PLATE HAS HOLES EXCEEDING 8MM IN DIAMETER.
BEFORE OPERATING THE UNIT, PLEASE THOROUGHLY READ AND FULLY UNDERSTAND THIS
MANUAL. IT SHOULD BE KEPT FOR FUTURE REFERENCE BY ALL USERS AND MAINTENANCE
PERSONNEL. DO NOT OPERATE OR PERFORM MAINTENANCE ON THE MACHINE WITHOUT FIRST
HAVING RECEIVED INSTRUCTIONS ABOUT ITS USE, MAINTENANCE AND SAFEGUARDS FROM
AN EXPERIENCED OPERATOR. THIS MACHINE HAS MOVING PARTS AND USES VOLTAGES THAT
ARE POTENTIALLY HAZARDOUS. FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THIS
MANUAL COULD RESULT IN SEVERE, POSSIBLY LIFE-THREATENING, PERSONAL INJURY. THIS
MACHINE HAS BEEN DESIGNED EXCLUSIVELY FOR MEAT PROCESSING; ANY USE OTHER THAN
MEAT PROCESSING IS NOT IN ACCORDANCE WITH THE MACHINE’S INTENDED APPLICATION,
IS STRICTLY PROHIBITED AND SHALL VOID OMCAN’S WARRANTY. OMCAN ASSUMES NO
RESPONSIBILITY FOR ANY DAMAGE OR INJURY RESULTING FROM IMPROPER USE OF THIS
MACHINE. THIS MACHINE’S INSTALLATION MUST BE IN ACCORDANCE WITH THE MANUFACTURER’S
INSTRUCTIONS AND CONFORM TO ALL APPLICABLE SAFETY AND HYGIENE STANDARDS AND
CODES. COMPLIANCE WITH SAID STANDARDS AND CODES IS THE SOLE RESPONSIBILITY OF THE
OWNER AND INSTALLER. DO NOT ALTER OR MODIFY THE MACHINE’S ORIGINAL DESIGN IN ANY
WAY. DOING SO WILL VOID OMCAN’S WARRANTY AND MAY RESULT IN PERSONAL INJURY OR
DAMAGE TO THE MACHINE.
• DO NOT open the machine or tamper with its internal parts; none of the internal components requires
adjustment or maintenance by the user.
•
DO NOT tamper with the machine’s mechanical or electrical safeguards.
• NEVER attempt to repair the machine on your own. Should the machine require service, contact the
authorized dealer from whom you purchased the machine.
• Use ONLY genuine Omcan parts and accessories and have them installed only by a qualified technician.
Use of unapproved parts and accessories voids Omcan’s warranty and may result in personal injury or
damage to the machine.
OPERATING HAZARDS!
CAREFULLY READ AND FULLY UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THE
MACHINE.
• DO NOT use the machine without wearing the protective gear required by law. While operating the
machine.
•
NEVER wear loose clothing or jewelry that could become caught in moving parts.
•
Keep your work area well lit and free of obstacles.
•
ALWAYS keep hands safely away from the machine’s moving parts.
• NEVER feed meat by hand; ALWAYS use the feed stomper. NEVER insert fingers into any machine
opening.
