Omcan 45412, Instruction Manual

Page: 15 / 32

15
Maintenance
The wire is now ready to use
If the two wire fastening hooks are not parallel with the work top, align.
The adjustments must only be made with the machine disconnected from the electricity mains.
Do not perform any operations without having received specific authorisation and adequate training on
the operating procedures as well as being informed about the possible dangers.
MAINTENANCE AND CLEANING
PRELIMINARY INSTRUCTIONS
Only qualified, specially trained and authorised personnel should carry out maintenance, cleaning and repair
jobs. Before carrying out any operation, the following precautions must be taken:
• Switch off the power on the machine panel via the power disconnecting device.
At the end of each operation:
• Reset and properly secure all the fixed and/or interlocking guards.