7
Operation
Note: removing the drawer (1) or lifting up the chute (3) stops the appliance from working (figure 6).
For easier cleaning, do not leave food to dry in the drawer or on the grating disc.
CHANGING DISC
Push the end of the lever (4), pull on the closing key (14) and remove the chute + lever unit to get to the disc
(6) (figure 2).
TAKING APART (LEFT-HANDED THREAD): (FIGURE 3)
•
Clamp the disc (6) and undo the screw (7) following the arrow (clockwise) with the closing key (14).
REASSEMBLING: (FIGURE 4)
•
Check that the key (8) is present on the motor shaft.
•
Check that the seal (13) is present on the disc (6).
•
Place the disc on the motor shaft making the key match the key groove.
•
Clamp the disc (6) and tighten the screw (7) following the arrow (anti-clockwise).
SAFE ACCESS TO THE TOOLS: (FIGURE 6)
The appliance can only start if the lever (4) is not extending out of the chute to insert the food (3) and if the
drawer catching the food (1) is correctly placed on the slideway (2).
Removing the drawer (1) causes the machine to stop. Re-starting the appliance requires specific operation of
the On / Off switch (5) again (position 1).
A cut in the mains power supply results in the On / Off switch (5) stopping (position 0).
The fact of lifting the lever to add food into the chute (3) causes the motor to stop, without causing the
appliance to stop completely.
Lowering the lever (4) allows the motor to be restarted.
MOTOR OVERLOAD SAFETY FEATURE:
Should the motor become blocked (foreign body, object that is too hard, too much pressure with the lever on
the products being processed), the On / Off switch (5) automatically trips to the 0 position.
Correct the problem and press the On / Off switch (5) (position 1).
If the problem persists, switch off the power supply to the machine (unplug the cord from the mains socket) and
call in the maintenance service or contact a SANTOS approved dealer.
Summary of Contents for 40619
Page 10: ...10 Figure Drawings...
