background image

5

Safety and Warranty

1.  Rotor protection grille. 

This safety feature impedes incidental contact with the rotor.

2.  Micro-switch.

3.  Knob to lock tank.

4.  Ball grip for locking the rotor in position.

ATTENTION!

Do Not for any reason tamper with the safety features.

DANGER AND WARNING NOTICES

ATTENTION

When the appliance is connected to the electricity supply do not touch any 

of the electronics. There is the risk of being electrocuted. Always respect the 

information given on the warning notices. Non-observance can cause injuries 

or even death. Make sure the warning notices are always in their correct 

position and are legible. If for some reason they are missing or are illegible fix them to the appliance or replace 

them.

NON-PERMITTED USES

The mixer must only be used for the uses given by the manufacturer, and in particular:

• 

Do Not use the appliance for mixing food other than for meat.

• 

Do Not use the appliance if it has not been correctly installed with all the protections correctly mounted 

avoiding any hazardous risk of injury.

•  Do Not touch any of the electrical parts without having first disconnected the appliance from the electricity 

supply: there is risk of electrocution.

•  Do Not mix quantities that cannot be contained in the mixing drum.

• 

Do Not wear clothing that does not conform with the accident prevention regulations. Ask your employer 

regarding safety regulations and accident prevention clothing.

• 

Do Not turn on the appliance if faulty or out of service. Before using the appliance make sure any 

hazardous working conditions have been eliminated. If there is a fault or problem with the appliance 

immediately turn it off and inform the maintenance team.

•  Do Not permit unauthorized staff to use the appliance. In case of an electrical accident the first thing to do 

is to pull the injured worker away from the appliance (normally in this situation the worker is unconscious). 

However, be very careful as this is very dangerous. The injured worker in this situation is an electricity 

conductor and touching him / her means being electrocuted. It is important to disconnect the electricity 

supply by disconnecting the fuse box and if this is not possible use an insulated object or material (wooden 

or PVC stick, fabric, leather, etc...) to pull the injured worker away. Immediately call the nearest casualty 

department so the injured worker is admitted to hospital for treatment.

• 

Do Not use the appliance in environments where there is gas in the atmosphere creating a high risk of 

combustion (explosion).

• 

Do Not repair the appliance without prior authorization.

• 

Always Respect the procedures for maintenance and technical assistance.

Summary of Contents for 37450





















Reviews: