3
General Information
Safety and Warranty
Omcan Manufacturing and Distributing Company Inc. and Food Machinery Of America, Inc. dba Omcan
are not responsible for any harm or injury caused due to any person’s improper or negligent use of
this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and
not under the influence of any drugs or alcohol, who has been trained in the correct operation of this
machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any
warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while
in operation.
The High Performance Tilting Blenders are simple to use and clean. However, for your safety read the
following instructions in order to avoid accidents:
1. Always unplug the machine when cleaning, servicing or when any other maintenance operation is needed.
2. Never use tools that do not belong to the machine during operation.
3. Never spray water on the machine.
4. Do not operate the machine while wearing wet clothes or wet shoes.
5. Before operating the machine, make sure it is properly grounded.
6. When washing inside of the Cup Nº02 (Pic. 01) ensure power is off and unit is unplugged. Be careful with
the blade as it has sharp edges.
General Safety Practices
The following safety instructions are addressed to both the operator of the machine as well as the person in
charge of maintenance. The user shall operate the machine only after being well acquainted with the safety
procedures described in the present manual.
READ THIS MANUAL THOROUGHLY.
Basic Operation Practices
Dangerous parts
Some parts of the electric devices are connected to high voltage points. These parts when touched may cause
severe electrical shocks or can even be
FATAL.
Never touch commands such as buttons, switches and knobs
with wet hands, wet clothes and/or shoes. By not following these instructions, operators could be exposed to
severe electrical shocks or even to a
FATAL
situation.
Summary of Contents for 31502
