10
Installation
USING THE MACHINE
LOADING THE PRODUCT ON THE TRAY AND SLICING
•
Ascertain that the thickness control knob is correctly positioned to ‘0’;
•
Draw back the carriage completely (towards the operator) to loading position;
•
Lift the product grip by pulling it away by 10 cm from the blade and put it in rest position;
•
Lay the product to be sliced against the guide plate on the operator side;
•
Secure by means of the product grip by exerting a slight pressure;
•
Adjust the thickness gauge. Start the blade by turning the switch or by pressing on the white or green
button;
• Grip the handle affixed onto the plate and start the forward and backward cutting movement. The product
travels towards the guide plate by gravity;
• When the product weight or its dimensions do not provide a satisfactory cut by effect of the gravity, use the
product grip handle;
• When finished, return the thickness control knob to ‘0’ and draw the carriage back;
•
Stop the blade by pressing the black or red button.
CLEANING THE SLICER
GENERAL
The machine must always be accurately cleaned
at least once a day
, and more often if necessary.
Always use protective gloves.
Maintenance
